Can't add a second USB lan card to Raspberry 3B+

Home Page Forums Network Management ZeroShell Can't add a second USB lan card to Raspberry 3B+

This topic contains 1 reply, has 1 voice, and was last updated by  Anders Kangemo 4 months, 3 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #65254

    Anders Kangemo
    Participant

    Hi, I’m trying to add a USB lan dongle to my raspberry 3+. It is a AX88x72A, Deltaco USB2 lan adapter. It is working on my zeroshell installed on a server but not on my raspberry. I get this when I check with dmesg:
    [ 3413.752196] usb 1-1.2: new high-speed USB device number 66 using dwc_otg
    [ 3413.895488] usb 1-1.2: New USB device found, idVendor=0b95, idProduct=772a
    [ 3413.895501] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [ 3413.895510] usb 1-1.2: Product: AX88x72A
    [ 3413.895519] usb 1-1.2: Manufacturer: ASIX Elec. Corp.
    [ 3413.895527] usb 1-1.2: SerialNumber: 000002
    [ 3414.122373] asix 1-1.2:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -71
    [ 3414.122387] asix 1-1.2:1.0 (unnamed net_device) (uninitialized): Failed to send software reset: ffffffb9
    [ 3414.122559] asix 1-1.2:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -71
    [ 3414.122569] asix 1-1.2:1.0 (unnamed net_device) (uninitialized): Failed to enable software MII access
    [ 3414.123856] asix 1-1.2:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0000: -71
    [ 3414.124022] asix 1-1.2:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0002: -71
    [ 3414.124188] asix 1-1.2:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -71
    [ 3414.124198] asix 1-1.2:1.0 (unnamed net_device) (uninitialized): Failed to enable hardware MII access
    [ 3414.124363] asix 1-1.2:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -71
    [ 3414.124373] asix 1-1.2:1.0 (unnamed net_device) (uninitialized): Failed to enable software MII access
    [ 3414.125655] asix 1-1.2:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0000: -71
    [ 3414.125824] asix 1-1.2:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0003: -71
    [ 3414.125986] asix 1-1.2:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -71
    [ 3414.125996] asix 1-1.2:1.0 (unnamed net_device) (uninitialized): Failed to enable hardware MII access
    [ 3414.126846] asix 1-1.2:1.0 eth0: register ‘asix’ at usb-3f980000.usb-1.2, ASIX AX88772 USB 2.0 Ethernet, 00:0e:ba:01:5b:f5
    [ 3414.127258] usb 1-1-port3: over-current change
    [ 3414.166329] usb 1-1.1-port2: over-current change
    [ 3414.362450] usb 1-1-port4: over-current change
    [ 3414.402421] usb 1-1.1-port3: over-current change
    [ 3414.602451] usb 1-1-port2: over-current change

    Any idéers how to fix this?

    Best Regards Anders

    #65256

    Anders Kangemo
    Participant

    Hi,
    I have figured out this by my self. I needed a external power to the USB devices. After that everything works fine:)
    However, I need to do mknod /dev/ppp c 108 0 every time I reboot my pi to get my Huawei USB to work.
    How do I add this lines to set this upp by it selfs during boot?

    //Anders

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.