Can anyone explain or help with bandwidthd

Home Page Forums Network Management ZeroShell Can anyone explain or help with bandwidthd

This topic contains 0 replies, has 0 voices, and was last updated by  bbozo 8 years, 6 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #42546

    bbozo
    Member

    First when I enable it:

    then after 10+minutes :

    oh yes and it did make statistics but it seems that it doesn’t any more.
    I did try to reboot the router with no luck.

    Thanks in advance

    #50804

    lonetorus
    Member

    @bbozo wrote:

    First when I enable it:

    oh yes and it did make statistics but it seems that it doesn’t any more.
    I did try to reboot the router with no luck.

    Thanks in advance

    What kind of network topology do you have, and what subnet have you activated bandwidthd for?

    also what are the specs of the machine running zeroshell, and how much traffic/user do you usually have?

    allthough seems like you have a single cpu machine and bandwidthd being configured for 3 subnets. each 200 seconds or whatever the zeroshell bandwidthd default is, it will redraw the graphs and that can be pretty cpu intensive, so first off i would try to lower the number of subnets it has to draw graphs for.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.