bridging with proxy on 2 interaces

Home Page › Forums › Network Management › Networking › bridging with proxy on 2 interaces

This topic contains 0 replies, has 0 voices, and was last updated by  color_n 10 years, 5 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • December 15, 2008 at 10:06 am #41363

    color_n
    Member

    hy

    i have situation with firewall already on the network . Now i want to configure proxy for web browsing , but it need to be allocated on same local subnet.
    My default gateway is firewall ,and on pc`s i will have proxy setup pointed to ip of zeroshell .
    On firewall i will redirect web traffic to go to zeroshell , and filtered it trough proxy routed back to firewall , my question is can i do that with zeroshell , can i do that by enabling bridge connection on NIC`s so that every card is local IP .

    thanks for advice

    bojan

    December 16, 2008 at 9:40 pm #47287

    vmv4
    Member

    Hi, Bojan!

    Zeroshell can act as a firewall so you can combine proxy and firewall functions on one PC simplifying your setup.

    Regards, vmv4

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.