BONDing multiple internet connections Home Page › Forums › Network Management › ZeroShell › BONDing multiple internet connections This topic contains 1 reply, has 0 voices, and was last updated by itanveer 11 months, 2 weeks ago. Viewing 1 post (of 1 total) Author Posts February 7, 2018 at 3:18 pm #44939 itanveerParticipant Dear Zeroshell community, The article written by Fulvio available at https://www.zeroshell.org/load-balancing-failover/#vpn-bonding seems simple but practically it is not working at least in my setup. A little about my setup. 1. I have 2 ISP connections, 7MB each…. I call it here A & B connection 2. My Net Balancer is perfectly working, no issues What I understand to make a BOND connection, I need to create VPN connection on each Gateway, I am trying to achieve this but so far without luck. Trying to make a LAN-to-LAN VPN connection with following: Status of my VPN first screen is ACTIVE LAN-to-LAN (OpenVPN), Remote Host: connection B WAN IP, port: 1195, TCP, Role: Client, Compression: Enable, Encryption: Enable, Authentication: X.509, Remote CN: connection B WAN IP, Gateway: Connection A after saving it, it never made the VPN connection….. Can you help me where I am doing wrong. If anybody has step by step guide with pictures for LAN-to-LAN VPN connection and afterward making a BOND connection, please share. Regards Ilyas Author Posts Viewing 1 post (of 1 total) You must be logged in to reply to this topic.