Zeroshell Linux Router

Routing and Bridging Firewall Solutions

  • News
  • Hardware
  • Download
  • Forums
  • FAQ
    • General questions
    • Storage
    • Network
    • VPN
    • Wireless
  • Video
  • License
  • Contact
  • Login

BGP

Home Page › Forums › Network Management › ZeroShell › BGP

This topic contains 0 replies, has 1 voice, and was last updated by  nikos.frangakis 11 months, 3 weeks ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • January 28, 2019 at 12:11 pm #64764

    nikos.frangakis
    Participant

    Hi,

    what is the current support of BGP in zeroshell?

    Is quagga installed and configurable?

  • Author
    Posts
Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.

News

  • New release and critical vulnerability
  • New Kernel 4.14.83
  • LogMeIn Hamachi VPN Client available for Zeroshell
  • Zeroshell 3.9.0 for Raspberry Pi
  • New release Zeroshell 3.9.0

Documentation

  • Multiple Internet Connections
  • QoS and Traffic Shaping
  • Hotspot using Captive Portal
  • RADIUS Accounting
  • Mobile Internet Connection
  • Wireless Access Point
  • OpenVPN Gateway
  • OpenVPN Client Configuration
  • Transparent Web Proxy
  • Captive Portal SAML 2.0
  • OpenDNS setup
  • Deep Packet Inspection
  • Traffic Statistics
  • Kerberos 5 Tutorial
    • Introduction
    • Aims
    • Definitions and terms
    • Operation
    • Tickets
    • Kerberos Cross Authentication
  • X.509 CA
  • RADIUS
  • VPN
  • Firewall
  • LDAP

Recent Topics

  • Zeroshell + Zerotruth
  • best schools in marathahalli
  • "Disconnect" host
  • How to configure Vlan dynamically with user radius?
  • Accounting : Credit goes to negetive
  • Can ORANGE PI ZERO be used as Access Point?
  • Your connection is not private Zeroshell
  • Bridge mode, Management not viewable
  • No internet after reboot Zeroshell
  • Can't boot Zeroshell 3.9.3A on Raspberry Pi 3 B Rev. 2
  • Host localhost not found: 3(NXDOMAIN)
  • DNS Error
  • Add DNS view function
  • Data matrix external tickets validation
  • How can I get a wireless adapter to show up under the "Show Network Interface"
  • Roaming
  • Captive portal is enabled, but client is still getting internet without signing
  • Random: 2 urandom warning(s) missed due to ratelimiting.
  • STAT FAILED (/etc/cron.d): No such file or directory
  • PPPoE use 100% CPU in zeroshell 3.9.3
  • Installing Zeroshell on ubuntu server 18.04
  • Integration with Active Directory
  • Time Syncronisation On Boot
  • IPSEC tunnels not supported.
  • Proxy Blacklist doesn't work
  • User accounting – time limit – session for users mac created
  • Manual mapping of ETHnn names to hardware interfaces
  • Detailed instructions for Captive Portal
  • Weak encryption on Zeroshell web interfce
  • VPN ignores gateway with failure

Recent Replies

  • Mangling the routing table with net balancer?
  • Your connection is not private Zeroshell
  • Mangling the routing table with net balancer?
  • Host auto discovery possible?
  • Zeroshell not booting on Hyper-V
  • Is there a limit in VIRTUAL SERVERS?
  • Mangling the routing table with net balancer?
  • Random: 2 urandom warning(s) missed due to ratelimiting.
  • VPN IP Leaks
  • How can I restrict access to only 1 host on my LAN for VPN?
  • SNMP and MRTG traffic statistics
  • Installing Zeroshell on ubuntu server 18.04
  • Mangling the routing table with net balancer?
  • Mangling the routing table with net balancer?
  • How can I restrict access to only 1 host on my LAN for VPN?
  • VPN IP Leaks
  • Mangling the routing table with net balancer?
  • block mac adress on the demand
  • LAN-to-LAN VPN routing
  • User accounting – time limit – session for users mac created
Continue with FacebookContinue with GoogleContinue with Twitter
Copyright (C) 2005-2018 by Fulvio Ricciardi - Lecce (Italy) | Theme: News Portal by Mystery Themes.
  • Twitter
  • Facebook
  • LinkedIn