beta11 in Soekris 4801

Home Page Forums Network Management Embedded Devices beta11 in Soekris 4801

This topic contains 0 replies, has 0 voices, and was last updated by  enmala 10 years, 2 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #41373

    enmala
    Member

    Hi,

    i’m trying to install ZeroShell in a Soekris 4801 using the ZeroShell-1.0.beta11-ALIX-CompactFlash-1GB.img.gz image, but at the boot I obtain an disk read error.

    The exact error displayed is:


    Probing [hdb] IDE device to startup the system ...
    end_request: I/O error, dev hdb, sector 27392
    Probing [1] USB and SATA devices to startup the system ...
    Probing [2] USB and SATA devices to startup the system ...
    Probing [3] USB and SATA devices to startup the system ...
    Probing [4] USB and SATA devices to startup the system ...
    Probing [5] USB and SATA devices to startup the system ...
    Probing [6] USB and SATA devices to startup the system ...
    Probing [7] USB and SATA devices to startup the system ...
    Probing [8] USB and SATA devices to startup the system ...
    Probing [9] USB and SATA devices to startup the system ...
    Bootstrap failure
    Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,2)

    The md5sum of the image is ok and, i suppose, the CF card to.

    Any idea?

    #47308

    imported_fulvio
    Participant

    Try to change model of CompactFlash.

    Regards
    Fulvio

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.