bandwitch users/groups with iptables Home Page › Forums › Network Management › Networking › bandwitch users/groups with iptables This topic contains 2 replies, has 0 voices, and was last updated by marti vielha 9 years, 7 months ago. Viewing 4 posts - 1 through 4 (of 4 total) Author Posts December 4, 2009 at 1:26 pm #42080 marti vielhaMember Hello, ItÂ´s possible make a bandwitch limit for group or users with iptables? thank you December 4, 2009 at 4:23 pm #49214 ppaliasMember In the QoS classifier make a class containing the IP addresses of the hosts you want. Then on the class manager fix their bandwidth on the desired level and finally assign the class on an interface. December 5, 2009 at 8:37 am #49215 marti vielhaMember ok, but the problem is that in the same IP i can have the two type of clients, one with 3mb bandwitch and another with 1mb, this clients are separated on type of users thank you December 5, 2009 at 2:34 pm #49216 ppaliasMember Then seperate your clients to 2 groups according to their bandwidth usage and assign them the according IPs. Author Posts Viewing 4 posts - 1 through 4 (of 4 total) You must be logged in to reply to this topic.