AP WITH VLAN

Home Page Forums Network Management ZeroShell AP WITH VLAN

This topic contains 1 reply, has 0 voices, and was last updated by  bskatz 7 years, 11 months ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #43154

    bskatz
    Member

    I’m trying a simple configuration using VLAN
    The idea is to use the VLAN associated with the conventional AP SSID that you have the option to configure up to 4 VLANs, using a normal non-configurable switch.

    My ideal is to configure the AP for example VLAN number 5.

    And configure the LAN network card Zeroshell in vlan 5 with an ip determined.
    To obtain DHCP and NAT servicion Zeroshell the AP only in the specific SSID and VLAN 5 Independently of other network services.
    The experience does not work, because when I connect a PC from an AP WiFi SSID with VLAN 5 has received even network services like DHCP in another segment.

    Not if the AP’s VLAN was created with another idea because if it is marked with the VLAN TAG 5 and reaches the entire network and not just the network card Zeroshell that VLAN 5 .
    someone has information about this topic
    Thanks
    Bernardo

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.