anyway to force a network card at 10Mb/s

Home Page Forums Network Management ZeroShell anyway to force a network card at 10Mb/s

This topic contains 1 reply, has 0 voices, and was last updated by  ingeniado 10 years, 8 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #41016

    ingeniado
    Member

    Hello,

    In order to connect my Zeroshell box to a Cisco 4000, I have to configure the network card to work at 10Mb/s Full Duplex (now is 100Mb/s Full Duplex), is there any way to do it in Zeroshell?

    thanks
    MA

    #46441

    imported_fulvio
    Participant

    Try with

    ethtool -s ETH00 speed 10 duplex full autoneg off

    Regards
    Fulvio

    #46442

    ingeniado
    Member

    Thanks for the fast reply, Fulvio.

    I’ve tried the code in shell prompt and works.
    I also have put the code in Startup script to make it permanent, this is the way, isn’t it?

    thanks.
    MA

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.