Allow remote HTTPS access by CLI Home Page › Forums › Network Management › ZeroShell › Allow remote HTTPS access by CLI This topic contains 0 replies, has 0 voices, and was last updated by Nigrofasciatum 4 years ago. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts July 8, 2015 at 9:29 am #44327 NigrofasciatumMember Hi, I´ve installed ZS on a remote dedicated server, managed by KVM. I,ve configured IPs/GW, and the server has correct connectivity to/from Internet. I want to enable remote SSH/HTTPS access, but I can´t do this through local HTTP GUI, (I currently have only acces by KVM console CLI) Which commands should I type to allow remote https access on my WAN eth1 interface? When I can access at first time, I´ll adjust security policies. Thanks July 8, 2015 at 11:04 am #53840 NigrofasciatumMember iptables -I SYS_HTTPS 1 -j ACCEPT With this command I can access HTTPS. So when I´m inside, I can configure remote web access from web interface 😉 Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.