ALIX 6b2 and Sierra MC8775

Home Page Forums Network Management ZeroShell ALIX 6b2 and Sierra MC8775

This topic contains 1 reply, has 0 voices, and was last updated by  tom82 9 years, 9 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #41629

    tom82
    Member

    Hi,

    I recently purchased an ALIX 6b2 board and a Sierra Wireless MC8775 UMTS module.

    I have tried to get it working in Zeroshell but with no luck.

    I am using the SIM Card slot on the top of the ALIX board, not the underside SIM.

    When I issue the command “lsusb” I get the following.

    root@zeroshell root> lsusb
    Unknown line at line 1809
    Duplicate HUT Usage Spec at line 2650
    Bus 002 Device 002: ID 1199:6812
    Bus 002 Device 001: ID 1d6b:0001
    Bus 001 Device 001: ID 1d6b:0002
    root@zeroshell root>

    The Sierra card is being shown as the first line:

    Bus 002 Device 002: ID 1199:6812

    I have configured the device in the “Network” Section of Zeroshell but the “show log” has the following:

    11:29:04 pppd 2.4.3 started by root, uid 0
    11:29:20 Connect script failed
    11:29:20 Exit.
    11:29:24 pppd 2.4.3 started by root, uid 0
    11:29:41 Connect script failed
    11:29:41 Exit.
    11:29:45 pppd 2.4.3 started by root, uid 0
    11:30:01 Connect script failed
    11:30:01 Exit.
    11:30:05 pppd 2.4.3 started by root, uid 0

    I have tried /dev/ttyUSB0, USB1, USB2, with APN, without APN, etc and it still does not connect. The SIM Card has no pin number on it.

    Does anyone know if modifications need to be made to the ALIX board to enable the SIM slot?

    What else could be wrong?

    Thanks
    Tom

    #48008

    rockmanchile
    Member

    maybe your APN needs authentification

    #48009

    anttu
    Member

    This combination works nicely here, so the problem should not be in th HW.

    What do you see in pppd and chat logs?

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.