Aggregating VPN and increasing bandwidth in layer 2

Home Page Forums Network Management ZeroShell Aggregating VPN and increasing bandwidth in layer 2

This topic contains 0 replies, has 0 voices, and was last updated by  ee 9 years, 6 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #41998

    ee
    Member

    greetings everyone, i’m trying to setup two vpn over to physical 3g ppp interfaces as stated in the ZS manuals.
    http://www.zeroshell.net/eng/load-balancing-failover/#vpn-bonding

    problem is with the two modems connected to the HSDPA network, as ppp0 and ppp1, there is no option under the “LAN-to-LAN Virtual Private Network Configuration” to specify the ppp0 gateway to use for each of the two vpns.
    under gateway the only available options are “Auto” and DEFAULT GATEWAY.

    how do i setup two VPNS to run over the different 3G ppp modems.

    Many thanks

    #48975

    ppalias
    Member

    Most likely you have not setup ppp0 and ppp1 to act as gateways and this is why they are not shown on the drop down menu.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.