After 60 user, captive portal stop Home Page › Forums › Network Management › ZeroShell › After 60 user, captive portal stop This topic contains 1 reply, has 0 voices, and was last updated by cmurillo 5 years, 11 months ago. Viewing 1 post (of 1 total) Author Posts November 5, 2013 at 7:48 pm #43773 cmurilloMember 1) In what context do you use the Captive Portal of Zeroshell? User LAN. 2) What are the hardware (CPU, RAM and disk) do you use? HP Proliant DL380 G4 2 procesor – XEON 3.6 GHZ RAM: 12 Gb. HD: 3 x 140 Gb. (RAID 5) 3) What release of Zeroshell do you use? Beta 16 4) Did you enable the protection against DoS (Denial of Service)? if the answer is yes, please specify the protection level (Low, Medium or High). No. 5) What is the total number of users that you manage with the captive Portal? Concurrent Users: 800 6) What was the peak of concurrent users connected? 60 7) At the peak of concurrent users connected, did you notice unacceptable delays in the captive portal authentication? Yes. Atfer 60 or 70 users, captive portal stop. Author Posts Viewing 1 post (of 1 total) You must be logged in to reply to this topic.