Administration Hangs!! — Input/output Error in commands

Home Page › Forums › Network Management › ZeroShell › Administration Hangs!! — Input/output Error in commands

This topic contains 0 replies, has 0 voices, and was last updated by  vviudez 10 years, 7 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • July 21, 2008 at 11:53 am #41103

    vviudez
    Member

    Hi guys!,

    I’m using Zeroshell for some month and it’s a great “tool” for our LAN… but I have a extrange problem.

    Once rebooted our Zeroshell server, everything works perfectly, but after some time (not precised but it’s between a couple of hours and a couple of days), the administration gui doesn’t works, until I can’t validate on it.

    Accesing to the console shell, every command I send, I recevie an “Input/Output error” message…
    But kerrnel an networking services are still working without problems…

    Any ideas?

    I’m using Zeroshell 1.0beta10 (with beta9 also have tthis problem), on hardware:

    HP Proliant ML 370 with 2 xeon CPU
    4 Disk 36 GB SCSI
    10 GB of RAM
    Multiple Network Cards (to access diferent networks)

    Regards!

    July 21, 2008 at 7:10 pm #46667

    mlapeyre
    Member

    I have the same problem when I use the vmware distribution in my laptop…I thought that was because I put it to hybernate and something went wrong because of that.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.