Admin my Wireless from Wired Lan

Home Page Forums Network Management Networking Admin my Wireless from Wired Lan

This topic contains 1 reply, has 0 voices, and was last updated by  cmosphoto 11 years, 5 months ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #40843

    cmosphoto
    Member

    Hi all…not a pro but not a noobie….i may be missng something

    First off…awesome piece of software…just what I have been looking for to use at home!!!

    I am trying to set up so I can admin my WLAN router from the wired lan
    Topology
    INTERNET Wired ROUTER 192.168.1.1<


    >192.168.1.54 ETH01 ZeroSell ETH00 192.168.251.3<
    >192.168.251.2 WLAN Router 172.16.0.X (wireless subet)

    I want to be able to admin the wireless router from the wired subnet. I can not reach the wireless router no matter what. I Have RIP enable in ZS and both routers…routing table is as follows

    Destination Netmask Type Metric Gateway Interface Flags State Source
    172.16.0.0 255.255.255.0 Net 2 192.168.251.2 ETH00 UG Up RIP
    192.168.230.0 255.255.255.0 Net 0 none VPN99 U Up Auto
    192.168.1.0 255.255.255.0 Net 0 none ETH01 U Up Auto
    192.168.251.0 255.255.255.0 Net 0 none ETH00 U Up Auto
    169.254.0.0 255.255.0.0 Net 2 192.168.251.2 ETH00 UG Up RIP
    69.0.0.0 255.0.0.0 Net 2 192.168.1.1 ETH01 UG Up RIP
    DEFAULT GATEWAY 0.0.0.0 Net 0 192.168.1.1 ETH01 UG Up Static

    I am a bit confused since it seems that it should route.
    From the 192.168.1.0 Subnet I can ping all the way to the ETH00 interface 192.168.251.3…..but it all stops there.

    Thanks in advance
    Glen

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.