802.1x on LAN wired network Home Page › Forums › Network Management › RADIUS 802.1x and Captive Portal › 802.1x on LAN wired network This topic contains 4 replies, has 0 voices, and was last updated by therebel23 8 years, 4 months ago. Viewing 6 posts - 1 through 6 (of 6 total) Author Posts December 8, 2010 at 9:00 am #42771 therebel23Member Hi, is zeroshell able to make 802.1x authentication over LAN (wired) network instead of Wifi network ? If no, is it difficult to configure ? Thanks ! December 8, 2010 at 10:13 am #51413 redfiveParticipant of course , but you need a switch that supports the 802.1x auth. December 8, 2010 at 10:20 am #51414 therebel23Member OK, thanks ! So for testing with one PC, i can link this PC directly to LAN ethernet port of the zeroshell box i suppose. I’m going to try. December 8, 2010 at 11:14 am #51415 redfiveParticipant I think not works , zeroshell for a wired lan acts as a radius server , but you also need an authenticator , in this case the switch…. December 8, 2010 at 11:24 am #51416 therebel23Member Ok, i understand .. hav you ever seen an authenticator running on linux that manage OSI 2 layer ? December 8, 2010 at 11:44 am #51417 redfiveParticipant no , I’m sorry 🙄 🙄 I use a cisco 2960… Author Posts Viewing 6 posts - 1 through 6 (of 6 total) You must be logged in to reply to this topic.