Zeroshell Linux Router

Routing and Bridging Firewall Solutions

  • News
  • Hardware
  • Download
  • Forums
  • FAQ
    • General questions
    • Storage
    • Network
    • VPN
    • Wireless
  • Video
  • License
  • Contact
  • About
  • Login

Re: That is correct

Home Page › Forums › Network Management › ZeroShell › Installation stuck – help › Re: That is correct

June 29, 2007 at 8:22 pm #45529

webwarrior
Member

The documentation says to first activate the Gateway, and then the Authentication server.

We need to fix that.

You are doing a great job!

News

  • LogMeIn Hamachi VPN Client available for Zeroshell
  • Zeroshell 3.9.0 for Raspberry Pi
  • New release Zeroshell 3.9.0
  • PPPoE Kernel Mode
  • New Kernel and Security Fix

Documentation

  • Multiple Internet Connections
  • QoS and Traffic Shaping
  • Hotspot using Captive Portal
  • RADIUS Accounting
  • Mobile Internet Connection
  • Wireless Access Point
  • OpenVPN Gateway
  • OpenVPN Client Configuration
  • Transparent Web Proxy
  • Captive Portal SAML 2.0
  • OpenDNS setup
  • Deep Packet Inspection
  • Traffic Statistics
  • Kerberos 5 Tutorial
    • Introduction
    • Aims
    • Definitions and terms
    • Operation
    • Tickets
    • Kerberos Cross Authentication
  • X.509 CA
  • RADIUS
  • VPN
  • Firewall
  • LDAP

Recent Topics

  • Zeroshell on APU4B4
  • Sort "Static IP Entries" in dhcp page
  • SMP: failed to stop secondary CPUs
  • OpenVPN client connection
  • Recommendation for the best VPN to purchase this Black Friday
  • x86 Unable to browse web pages
  • ZeroShell-3.9.0-X86.iso seems corrupt
  • ERROR: no resources available to create WLAN01
  • After Authentification no internet connection?
  • Zerotruth and remote asterisk
  • Network settings with Virtualbox
  • Running ZeroShell 3.9.0 in VMWare Workstation
  • Setting up two networks – New to all of this, so leaning
  • Port forwarding
  • Zeroshell behind Webproxy
  • server dns fails it does not connect
  • support ipv6
  • development compilation errors
  • Bug in ZT ?
  • DNS forward
  • Asterisk start error
  • Updating nDPI libraries
  • GCC permissions
  • where is traceroute in ZeroShell's shell ?
  • zeroshell hostapd — how to modify ht_capab and take effect
  • tz database outdated
  • Load Average Zeroshell 3.8.1
  • Script to restart openvpn lan-to-lan
  • Raspberry B 3+ No Wifi
  • lan to lan vpn tls X.509 not bridged configuration sample

Recent Replies

  • sms
  • Best Network Card for a WiFi Access Point?
  • ZeroShell-3.9.0-X86.iso seems corrupt
  • Zeroshell 3.9.0A not bot pi3b+ on first launch
  • 3.9.0A frequent kernel panic when booting on RPI 3 B+
  • After Authentification no internet connection?
  • Network settings with Virtualbox
  • 3.9.0A frequent kernel panic when booting on RPI 3 B+
  • 3.9.0A frequent kernel panic when booting on RPI 3 B+
  • 3.9.0A frequent kernel panic when booting on RPI 3 B+
  • Port forwarding
  • 3.9.0A frequent kernel panic when booting on RPI 3 B+
  • Zeroshell 3.9.0A not bot pi3b+ on first launch
  • WebServices on Internal Lan
  • Asterisk start error
  • GCC permissions
  • GCC permissions
  • GCC permissions
  • SITE TO SITE ZEROSHELL – OPEN VOPN SERVER
  • lan to lan vpn tls X.509 not bridged configuration sample
Continue with FacebookContinue with GoogleContinue with Twitter
Copyright (C) 2005-2018 by Fulvio Ricciardi - Lecce (Italy) | Theme: News Portal by Mystery Themes.
  • Twitter
  • Facebook
  • LinkedIn