Re: reconnect not working with ZS 3.3.x

Home Page Forums Network Management ZeroShell automated disconnect Re: reconnect not working with ZS 3.3.x

#47340

Matze
Participant

Hi,

the cron with “killall pppd” works nice in all ZS versions but isn’t work in 3.3.x
The reconnect works, but the net balancer not notice this the connection was rebuilt = the connection remains on the status failed.
(In Germany kill the most ISP’s the connection after 24 hours)

I have in NetBalancer for this connection remove the hook “UP” and sit down again, then it works again and the connection is set to active.

In the logs I find no clue why the NetBalancer the connection no longer recognizes:

starting the killall pppd cron:
pppd:
14:52:20 Terminating on signal 15
14:52:20 Connect time 364.7 minutes.
14:52:20 Sent 210239120 bytes, received 2857866466 bytes.
14:52:20 Connection terminated.
14:52:20 Exit.
14:52:25 pppd 2.4.3 started by root, uid 0
14:52:25 Using interface ppp0
14:52:25 Connect: ppp0 /dev/pts/0
14:52:27 PAP authentication succeeded
14:52:27 local IP address [clean_IP]
14:52:27 remote IP address [clean_IP]

pppoe-connect:
14:52:20 PPPoE connection lost; attempting re-connection.

NetBalancer:
14:52:28 [ICMP] No link detected with the gateway (VDSL)
14:52:28 [ICMP] FAULT: VDSL (Interface: ppp0) [Last Uptime: 6h 4m 17s]
14:52:28 Default Route has been changed: nexthop via 192.168.4.1 weight 1 realm 100
14:53:44 (TEST) ==============================================================
14:53:44 (TEST) GATEWAY : DEFAULT GATEWAY (192.168.4.1)
14:53:44 (TEST) => [173.194.112.175] : Success (Round Trip Time: 63.0 ms)
14:53:44 (TEST) => [193.99.144.85] : Success (Round Trip Time: 59.2 ms)
14:53:44 (TEST) => [212.227.222.9] : Success (Round Trip Time: 62.3 ms)
14:53:44 (TEST) GATEWAY : VDSL (ppp0)
14:53:47 (TEST) => [173.194.112.175] : ERROR
14:53:50 (TEST) => [193.99.144.85] : ERROR
14:53:53 (TEST) => [212.227.222.9] : ERROR
14:53:53 (TEST) ==============================================================
14:53:53 [ICMP] Failover monitor has started
14:54:29 [ICMP] Failover monitor has started
14:54:31 Default Route has been changed: nexthop dev ppp0 weight 2 realm 101
14:54:33 [ICMP] Failover monitor has started