Re: Re: Route

Home Page Forums Network Management Signal a BUG Route Re: Re: Route

#49155

divide
Member

@chrmueller wrote:

Hello, i am from germany. At first sorry for my englisch
I Have found some Bug under Release 1.0.beta12

I have add a route under “ROUTER” an sometimes the router forget this route, then I must Change this Route an save the same settings and all works good. And after a restart , the routes are not active

I have the latest release beta15 and I have to agree with this bug. In my scenario seconday route will disappear when my cable modem disconnect randomly and eth1 goes down.

Here is my routing table:

Destination Gateway Genmask Flags Metric Ref Use Iface
82.22.50.234 72.221.232.1 255.255.255.255 UGH 0 0 0 ETH01
192.168.1.0 * 255.255.255.0 U 0 0 0 BRIDGE00
192.168.10.0 192.168.1.10 255.255.255.0 UG 0 0 0 BRIDGE00
77.221.232.0 * 255.255.248.0 U 0 0 0 ETH01
82.22.0.0 192.168.1.6 255.255.0.0 UG 10 0 0 BRIDGE00
default 77.221.232.1 0.0.0.0 UG 0 0 0 ETH01

The route
82.22.50.234 72.221.232.1 255.255.255.255 UGH 0 0 0 ETH01
disappears when eth1 goes down and route wont come up after eth1 is up.