Home Page › Forums › Network Management › Bridges and Routers › Passing VLAN tags across Bridge › Re: Re: Passing VLAN tags across Bridge
@ismashkhy wrote:
My LAN is ETH00
WAN is ETH01BRIDGE00 them
ETH00–>ETH01
=============
I want zeroshell to act as a transparent filter across from my VLAN manage switch to the Main Firewall,
=============
from my VLAN Manage switch
VLAN100 = DC Active Directory
VLAN110 = CLients
VLAN210 = Guest=============
How can I pass the VLAN tags across with zeroshell
=============
And also Win2K3 AD w/c is member of VLAN100 will manage the DHCP leases and request.
=============
VLAN100
MAin FW = 10.5.0.2
Zeroshell (Bridge) = 10.5.0.3
Win2k3 = 10.5.0.1
DNS = 10.5.0.1VLAN110
IP GW= 10.5.10.1/24VLAN210
IP GW= 10.5.210.1/24=============
I have tried all FW distro that I could try,
but Zeroshell might fit my needs,
=================
I had to create vlan’s on my box for the ETH interfaces. I put them on ETH01.10, ETH01.11, ETH01.12 for VLAN’s 10-12. Once I did that, that physical interface was 802.1q (?) trunked so it talked to my managed switches just fine.