I am unable to use more than 10 subnets on 1 network adapter. In Zeroshell under NetworkDHCP section, I can successfully have 9 subnets but when I add 1 (the 10th) the status ” Active on: EHT0 =Green”) switches to “Active ETH0 =NONE = red”. Is this a limitation of Subnets on 1 Network Adapter or something else. Any info would be greatly appreciated.
mistake, it’s regarding the DHCP Subnets. I am unable to configure more than 9 Subnets on 1 Network Adapter. Additional info, Subnets are working for more than 9 Subnets but the DHCP configuration for the Subnets does not work.