Re: Re: Captive Portal survey

Forums Network Management ZeroShell Captive Portal survey Re: Re: Captive Portal survey



➡ 1) In what context do you use the Captive Portal of Zeroshell?
In my network, I use the zeroshell radius server for 802.1X authentification. Well, that’s okay for me and my hardware, but very often I’ve got some visitors in my house, who just want to access the internet. So I create a new user on the radius server and die visitors are using the Captive Portal to log in.

➡ 2) What are the hardware (CPU, RAM and disk) do you use?
I use a ALIX (alix2d3) board for my setup. It’s a 500 MHz AMD Geode LX800 with 256MB RAM

➡ 3) What release of Zeroshell do you use?
Currently the 1.0.beta15

➡ 4) Did you enable the protection against DoS (Denial of Service)? if the answer is yes, please specify the protection level (Low, Medium or High).
yes, @medium.

➡ 5) What is the total number of users that you manage with the captive Portal?
Currently there are 63 user in the radius DB.

➡ 6) What was the peak of concurrent users connected?
afaik 5 or 6

➡ 7) At the peak of concurrent users connected, did you notice unacceptable delays in the captive portal authentication?