Home Page › Forums › Network Management › ZeroShell › ALIX embedded device for network appliances › Re: Re: ALIX embedded device for network appliances
June 27, 2008 at 6:08 pm
#46035
Member
Fulvio,
Was there anything special you did to connect to the Alix board? I just got the ALIX.2C3 and bought a NULL modem cable (cross wired) like they say and can’t connect to the console.
If you could help that would be awesome.
thanks
@fulvio wrote:
The ALIX.2C2 http://www.pcengines.ch/alix2c2.htm with 256MB of RAM, AMD Geode LX CPU 500MHz processor and MiniPCI expansion slots has been tested to work fine with the WRAP CompactFlash image of Zeroshell. I have been impressed by the better performance of this embedded platform for network appliances.
Regards
Fulvio