Re: NOKIA Internet stick CS-19

Home Page Forums Network Management Linux and Networking NOKIA Internet stick CS-19 Re: NOKIA Internet stick CS-19

#51731

abahaba
Member

Sucseed,

Nokia is working – dialing and connecting …

Thanks to ppalias advises in some forum posts here (for example: http://www.zeroshell.net/eng/forum/viewtopic.php?t=2579)

all I did can be described in two steps (Of course ZS was installed before):

1) I wrote in STARTUP/CRON in PRE BOOT:
usb_modeswitch -v 0421 -p 062c -V 0421 -P 0612 -m 01 -M 5553424312345678000000000000061b000000020000000000000000000000

A test result was such:

* usb_modeswitch: tool for controlling “flip flop” mode USB devices
* Version 0.9.4 (C) Josua Dietze 2008
* Works with libusb 0.1.12 and probably other versions

Looking for target devices
No target device found
Looking for default devices
Found default devices (1)
Prepare switching, accessing latest device
Looking for active default driver to detach it
OK, driver found (“usb-storage”)
OK, Driver “usb-storage” successfully detached
Setting up communication with device
Trying to send the message
OK, message successfully sent.
-> See /proc/bus/usb/devices (or call lsusb) for changes. Bye

[Pre Boot]: SUCCESS

2) I wrote in STARTUP/CRON in POST BOOT:

comgt -d /udev/ttyACM1

A test result was such:

SIM ready
Waiting for Registration..(120 sec max)
Registered on Home network: “XXXXXX”,0
Signal Quality: 14,0

[Post Boot]: SUCCESS

Now I’m testing the speed with a such signal quality 😉