Reply To: How to create a basic LAN to LAN VPN with Zeroshell?

Home Page Forums Network Management VPN How to create a basic LAN to LAN VPN with Zeroshell? Reply To: How to create a basic LAN to LAN VPN with Zeroshell?

#54650

DrDave
Member

Ok, so I should setup DHCP on both sides then right?
Do I not need to bridge the lan and vpn? or only on one side? or?
What is a VLAN? do I need that?

The main office runs on 192.168.0.1(router)
I changed the subnet today from 255.255.255.0 to 255.255.254.0
My guess would be to have the main network on 192.168.0.X and the second network for 192.168.1.X? Setup DHCP on both, one for the 0.x range and one for the 1.x range? Would that “just work” without the bridge? or?

Sorry to sound like such a noob… I’m not that stupid, just want to make sure I do it right… lol.

Thanks in advance for your help. Again it’s a very simple setup, no load balancing or anything (yet) just need the two locations to be able to access the servers…

Dave M