Home Page › Forums › Network Management › VPN › OpenVPN GUI 2.0 client keeps disconnecting right after conne › Reply To: OpenVPN GUI 2.0 client keeps disconnecting right after conne
Yes, it does look correct … you should be able to reach, while connected via vpn, (only) the host 10.10.10.2.
The connected clients will obtain an ip address from the vpn server, ‘Client IP Address Assignment’ , starting from 192.168.250.50 up to 192.168.250.55, based on your config
Try and report …….. 😉
IMHO, OpenVpn In ZS (I use openvpn on debian , on UBNT EdgeRouter …) is the simpler VPN service ever tried…. goes alone !! Like eat an ice cream, compared, for eg., to configure, via cli, the ezvpn with PKI on a cisco ISR…
If all is ok , and you are still interested, I’ll post some configs for obtain other goals
P.S. if you are using the firewall, you have to create some rules in INPUT and FORWARDING, for allowing the vpn users to go where you want (but this is the same in each fw, where the firewall is used)