Reply To: OpenVPN GUI 2.0 client keeps disconnecting right after conne

Home Page Forums Network Management VPN OpenVPN GUI 2.0 client keeps disconnecting right after conne Reply To: OpenVPN GUI 2.0 client keeps disconnecting right after conne

#54093
redfive
Participant

Isn’t difficult, is ‘only’ …highly customizable …
Well, let’s start from the beginning…. by default, ZS uses, for the VPN99, the ip address 192.168.254.254/24 …. leave it as is, remove the flag ‘Source Nat’, then via the ‘Net’ button, declare the network 10.10.10.0/24, save….. after that the vpn connection is established, from the command prompt, issue

netstat -r | find "10.10.10.0"

You should see something like

10.10.10.0 255.255.255.0 192.168.250.x 192.168.250.254  21 

And you should be able to reach the hosts on 10.10.10.0/24 network (if fw rules allow) … this is the first step …
(the nice has still to come, don’t give up … 😉 )
Cheers,
jonatha