Home Page › Forums › Network Management › VPN › OpenVPN GUI 2.0 client keeps disconnecting right after conne › Reply To: OpenVPN GUI 2.0 client keeps disconnecting right after conne
Something is unclear … are you using the VPN99 bridged with the ‘lan’ ? Or is on its own subnet ? The ip addresses seem the same ….. Anyway, you need L2 visibility among the vpn users and the lan hosts, or is enough, for VPN users, L3 visibility only to that specific host (and maybe, for the admin, the access to the whole network …) ?
In the second case,…. ZS, for the H2L, by default uses the full-tunnel (–push-redirect-gateway, all clients traffic will flow through the vpn tunnel…. so, you may try, for starting, by using a dedicated network for the VPN99 ( eg. 192.168.240.1/28), and, via the ‘Net’ button, declare the networks which will be reacheable via the vpn tunnel ( as the cisco split-tunnel) , in your case 10.10.10.0/24, in this way, the normal traffic will flow through its normal way, while only the traffic destinated to the 10.10.10.0/24 will be ‘pushed’ in the vpn tunnel…..