Reply To: OpenVPN GUI 2.0 client keeps disconnecting right after conne

Home Page Forums Network Management VPN OpenVPN GUI 2.0 client keeps disconnecting right after conne Reply To: OpenVPN GUI 2.0 client keeps disconnecting right after conne

#54072
redfive
Participant

Hi DrmCa, you may try as follows … firstly, install openvpn 2.3.10, then …
On ZS, in the vpn section, X.509 Configuration, X.509 Host Certificate, are you using local or imported ? In the first case, the client must hace , as CA certificate, the CA certificate of ZS itself ( without the private key),
SECURITY, X.509 CA, Setup, export button (uncheck the flag ‘key’).
In the second case, the client must have the CA certificate of the CA which has signed the imported certificate that you are using in ZS for the vpn server (and which could also be the same that you are using for the https server…).
For eg, personally I use for ZS as well as for the client, certificates which have been generated from an external CA, so for my, an additional step is importing the ‘external’ CA certificate in ‘Trusted CAs’, and still in vpn section, X.509 Configuration, authentication button
‘Allow the X.509 VPN access with the certificates signed by the following Trusted CAs:’ , check the imported CA certificate ……
Cheers,
jonatha