Reply To: Tunnel all traffics (everything) through LAN-to-LAN VPN

Home Page Forums Network Management VPN Tunnel all traffics (everything) through LAN-to-LAN VPN Reply To: Tunnel all traffics (everything) through LAN-to-LAN VPN

#53415

redfive
Participant

You could achieve the goal by bridging the VPN with the ETHxx, and use as default gateway the ip address of the remote bridge, but , in this case , if for some reasons the internet of the main office goes down, the branch office’s clients, won’t be able to reach the internet as well,… second solution, could be … enable the net-balancer, give an high weight(16) to the real default gateway , and as second gateway (1), use the inner ip address of the vpn in the main office, NAT on the VPN00 (*) of the branch office, and a balancing rule to force the clients to use, as target-gateway, the ip address of the main office’s vpn……of course, never tried 🙂
(*) The NAT is for simplify the job, obviously you can also leave the packets as they are, and play with static routes.
Regards