Reply To: Boot using serial one zeroshell 3.0.0 on a soekris 6501

Home Page Forums Network Management ZeroShell Boot using serial one zeroshell 3.0.0 on a soekris 6501 Reply To: Boot using serial one zeroshell 3.0.0 on a soekris 6501

#53234

rsiera
Member

Ok, it took me a long time to figure out that my DD.EXE for windows didn’t create valid usb images.
But this tool did: http://rufus.akeo.ie/
So then everything went according to plan.


Start Soekris
Break with ctrl+P
Execute following commands:
set ConLock=Disabled
set ConSpeed=38400
set ConLock=Enabled
set ConMute=Enabled
attach usb with image
reboot
Break with ctrl+P
Execute command
boot 81
Wait for 1,5 min and zeroshell is available

optionally


Start Soekris
Break with ctrl+P
Execute following commands:
set ConLock=Disabled
set ConSpeed=38400
set ConLock=Enabled
set ConMute=Enabled
set BootDrive=81 80 F0
attach usb with image
reboot
Wait for 1,5 min and zeroshell is available

BTW, sometimes the reset button isn’t enough. Sometimes a power cycle is necessary.