Home Page › Forums › Network Management › ZeroShell › Boot using serial one zeroshell 3.0.0 on a soekris 6501 › Reply To: Boot using serial one zeroshell 3.0.0 on a soekris 6501
I tried ctrl^P and set conMute=Enabled. boot 81 (from USB) and then word GRUB appears, but then nothing moves.
I’m using ZeroShell-3.0.0-Disk-2GB.img.gz which I unpacked and copied the img with dd for windows to a usb stick.
I’m using baud 19200 speed.
Any ideas why this doesn’t work in my setup?
In my case I changed both ConMute and ConSpeed
It’s very importat that you disable the hardware flow control in your minicom/serial connection.