Reply To: Boot using serial one zeroshell 3.0.0 on a soekris 6501

Home Page Forums Network Management ZeroShell Boot using serial one zeroshell 3.0.0 on a soekris 6501 Reply To: Boot using serial one zeroshell 3.0.0 on a soekris 6501

#53231

rsiera
Member

Hi,

I tried ctrl^P and set conMute=Enabled. boot 81 (from USB) and then word GRUB appears, but then nothing moves.

I’m using ZeroShell-3.0.0-Disk-2GB.img.gz which I unpacked and copied the img with dd for windows to a usb stick.

I’m using baud 19200 speed.

Any ideas why this doesn’t work in my setup?