Zeroshell Linux Router

Routing and Bridging Firewall Solutions

  • News
  • Hardware
  • Download
  • Forums
  • FAQ
    • General questions
    • Storage
    • Network
    • VPN
    • Wireless
  • Video
  • License
  • Contact
  • Login

Reply To: ZS as 3g router, speed tops at 1,5 / 0,75 Mbps (down/up)

Home Page › Forums › Network Management › ZeroShell › ZS as 3g router, speed tops at 1,5 / 0,75 Mbps (down/up) › Reply To: ZS as 3g router, speed tops at 1,5 / 0,75 Mbps (down/up)

May 8, 2013 at 6:13 am #52417

Ariesleo
Member

I do not understand this forum.

News

  • New Kernel 4.14.83
  • LogMeIn Hamachi VPN Client available for Zeroshell
  • Zeroshell 3.9.0 for Raspberry Pi
  • New release Zeroshell 3.9.0
  • PPPoE Kernel Mode

Documentation

  • Multiple Internet Connections
  • QoS and Traffic Shaping
  • Hotspot using Captive Portal
  • RADIUS Accounting
  • Mobile Internet Connection
  • Wireless Access Point
  • OpenVPN Gateway
  • OpenVPN Client Configuration
  • Transparent Web Proxy
  • Captive Portal SAML 2.0
  • OpenDNS setup
  • Deep Packet Inspection
  • Traffic Statistics
  • Kerberos 5 Tutorial
    • Introduction
    • Aims
    • Definitions and terms
    • Operation
    • Tickets
    • Kerberos Cross Authentication
  • X.509 CA
  • RADIUS
  • VPN
  • Firewall
  • LDAP

Recent Topics

  • Can't log in on OrangePi One
  • PC ISO install instructions
  • How can I create a DHCP server in ZeroShell 3.9.0 for multiple subnets?
  • LAN2LAN to VPN Provider – Up, pingable through from Zs, but not routing from LAN
  • Qrcode per zerotruth ( qrcode for zerotruth )
  • Activation and access to repositories
  • Netbalancer in zS 3.8.1 strange behaviour
  • Feature request
  • Zeroshel and Parallel Port ( modules wanted )
  • Get DNS records list
  • configure user to connect 2 hours per day
  • Accounting
  • Unable to Get WAN DHCP Address
  • In Praise of ZeroShell
  • ZeroShell as an LXC in Proxmox?
  • Flush DNS forwarder cache
  • PPPoE Not Working on Raspberry Pi 3.9.1A But Does Work on X86 3.9.0
  • RPI 3 B+: console=ttyS0 not working while booting / need a development guide.
  • DNS A record for domain
  • Using conntrack -F to keep VOIP working seems to be interfering with VPN
  • These new forum UI
  • WiFi client mode WPA-EAP (PEAP) MSCHAP
  • LDAP Corruption After Profile Restore
  • SITE TO SITE VPN TUNNEL With Public IPs and bridging
  • Using ZeroShell as a VM-Lab networking device with WiFi uplink
  • One touch x220s 3g dongle
  • Wireless AP (DLINK DWA-582 802.11ac)
  • BGP
  • NEW Release ZS 3.91 for X86-64 and Raspberry
  • Authentication with website link

Recent Replies

  • Can't log in on OrangePi One
  • How can I restrict access to only 1 host on my LAN for VPN?
  • Net Balanacer failover monitoring
  • Qrcode per zerotruth ( qrcode for zerotruth )
  • Change HTTPS port
  • Zeroshel and Parallel Port ( modules wanted )
  • Change HTTPS port
  • Many updates failing
  • configure user to connect 2 hours per day
  • Unable to Get WAN DHCP Address
  • 3.9.0A frequent kernel panic when booting on RPI 3 B+
  • Documentation
  • Default gateway? Can no longer set by interface?
  • Running Zeroshell in a VM
  • Running Zeroshell in a VM
  • ZeroShell-3.9.0-X86.iso seems corrupt
  • 3.9.0A frequent kernel panic when booting on RPI 3 B+
  • These new forum UI
  • These new forum UI
  • These new forum UI
Continue with FacebookContinue with GoogleContinue with Twitter
Copyright (C) 2005-2018 by Fulvio Ricciardi - Lecce (Italy) | Theme: News Portal by Mystery Themes.
  • Twitter
  • Facebook
  • LinkedIn