Zeroshell Linux Router

Routing and Bridging Firewall Solutions

  • News
  • Hardware
  • Download
  • Forums
  • FAQ
    • General questions
    • Storage
    • Network
    • VPN
    • Wireless
  • Video
  • License
  • Contact
  • About
  • Login

Reply To: MRTG – Configure DNS to reverse this IP

Home Page › Forums › Network Management › ZeroShell › MRTG – Configure DNS to reverse this IP › Reply To: MRTG – Configure DNS to reverse this IP

January 16, 2012 at 6:14 pm #52141

Alderon
Participant

You must configure reverse zone to translate ip address to domain name.

News

  • New Kernel 4.14.83
  • LogMeIn Hamachi VPN Client available for Zeroshell
  • Zeroshell 3.9.0 for Raspberry Pi
  • New release Zeroshell 3.9.0
  • PPPoE Kernel Mode

Documentation

  • Multiple Internet Connections
  • QoS and Traffic Shaping
  • Hotspot using Captive Portal
  • RADIUS Accounting
  • Mobile Internet Connection
  • Wireless Access Point
  • OpenVPN Gateway
  • OpenVPN Client Configuration
  • Transparent Web Proxy
  • Captive Portal SAML 2.0
  • OpenDNS setup
  • Deep Packet Inspection
  • Traffic Statistics
  • Kerberos 5 Tutorial
    • Introduction
    • Aims
    • Definitions and terms
    • Operation
    • Tickets
    • Kerberos Cross Authentication
  • X.509 CA
  • RADIUS
  • VPN
  • Firewall
  • LDAP

Recent Topics

  • PPPoE Not Working on Raspberry Pi 3.9.1A But Does Work on X86 3.9.0
  • RPI 3 B+: console=ttyS0 not working while booting / need a development guide.
  • DNS A record for domain
  • Using conntrack -F to keep VOIP working seems to be interfering with VPN
  • These new forum UI
  • WiFi client mode WPA-EAP (PEAP) MSCHAP
  • LDAP Corruption After Profile Restore
  • SITE TO SITE VPN TUNNEL With Public IPs and bridging
  • Using ZeroShell as a VM-Lab networking device with WiFi uplink
  • One touch x220s 3g dongle
  • Wireless AP (DLINK DWA-582 802.11ac)
  • BGP
  • NEW Release ZS 3.91 for X86-64 and Raspberry
  • Authentication with website link
  • Python Programming
  • ZS no longer supported?
  • unable to access after activating profile
  • Unable to open web page with Safari 12
  • web page editor or custom page import
  • Virtual Server port forwarding
  • Radius configuration change
  • Kernel addon
  • Allow Network Broadcast packets from one network to another
  • SSH usage
  • Whitelist Hosts
  • Shaping not working in Zerotruth 4.0a
  • Some tips for CP handling
  • Certificate errors and no admin web interface
  • Help with zeroshell script
  • Test for a student

Recent Replies

  • ZeroShell-3.9.0-X86.iso seems corrupt
  • 3.9.0A frequent kernel panic when booting on RPI 3 B+
  • These new forum UI
  • These new forum UI
  • These new forum UI
  • WiFi client mode WPA-EAP (PEAP) MSCHAP
  • tz database outdated
  • NEW Release ZS 3.91 for X86-64 and Raspberry
  • NEW Release ZS 3.91 for X86-64 and Raspberry
  • One touch x220s 3g dongle
  • Some tips for CP handling
  • ZS no longer supported?
  • NEW Release ZS 3.91 for X86-64 and Raspberry
  • SSH usage
  • Kernel addon
  • where is traceroute in ZeroShell's shell ?
  • x86 Unable to browse web pages
  • Blocking Websites
  • Kernel addon
  • Whitelist Hosts
Continue with FacebookContinue with GoogleContinue with Twitter
Copyright (C) 2005-2018 by Fulvio Ricciardi - Lecce (Italy) | Theme: News Portal by Mystery Themes.
  • Twitter
  • Facebook
  • LinkedIn