Reply To: Need help and advise with Zeroshell and Router

Home Page Forums Network Management Networking Need help and advise with Zeroshell and Router Reply To: Need help and advise with Zeroshell and Router

#51423

redfive
Participant

if you cannot manage the cisco router , ( add a static route ) , there are two “dirty” ways that you can take :
1st : add on each pc’s of the 192.168.2.0/24 a static route , something like

route add -p 10.10.10.0 mask 255.255.255.0 192.168.2.10 metric 3

( the -p argument makes the route permanent , otherwise you will lose the route at next reboot )

2nd : change , on each pc’s on the 192.168.2.0/24 the default gateway with the ip address of the ZS eth00 interface ( 192.168.2.10 ) , you can do this by upgrading the dhcp setting on your dhcp server .( but be aware , if your ZS machine fails , all your network will be without a default route for the internet )

in both case , on ZS machine create a static default route with next hope address the ip of the cisco router (192.168.2.51) , and disable nat