Reply To: USB 3G Modem Not Working with Zeroshell

Home Page Forums Network Management ZeroShell USB 3G Modem Not Working with Zeroshell Reply To: USB 3G Modem Not Working with Zeroshell

#51283

lijinshyam
Member

Yah …I figure it out….

I hit the command

usb_modeswitch -v 12d1 -p 140b -H 1

and it is done…

root@zeroshell etc> usb_modeswitch -v 12d1 -p 140b -H 1

* usb_modeswitch: tool for controlling “flip flop” mode USB devices
* Version 0.9.4 (C) Josua Dietze 2008
* Works with libusb 0.1.12 and probably other versions

Looking for default devices
Found default devices (1)
Prepare switching, accessing latest device
OK, Huawei control message successfully sent.
-> See /proc/bus/usb/devices (or call lsusb) for changes. Bye

When i tried to add a new USB modem using the webUI…

Modem connected to field is still Not located…

and /proc/bus/usb/devices gives…

T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 9 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=140b Rev= 0.00
S: Manufacturer=HUA�WEI TECHNOLOGIES
S: Product=HUAWEI Mobile
S: SerialNumber=�������������������
C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=08(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms

Any idea how to add the usb modem..?

thanks…
Lijin