Reply To: INIT: id "7" respawning too fast : disabled for 5

Home Page Forums Network Management Signal a BUG INIT: id "7" respawning too fast : disabled for 5 Reply To: INIT: id "7" respawning too fast : disabled for 5

#51104

Pit
Member

My interrupts are:

CPU0
0: 68 IO-APIC-edge timer
1: 354 IO-APIC-edge i8042
9: 0 IO-APIC-fasteoi acpi
15: 3247 IO-APIC-edge ide1
16: 0 IO-APIC-fasteoi ETH00, ETH03
17: 14 IO-APIC-fasteoi firewire_ohci
18: 5193 IO-APIC-fasteoi ETH01, ETH04
19: 436 IO-APIC-fasteoi ETH02
NMI: 0 Non-maskable interrupts
LOC: 207416 Local timer interrupts
RES: 0 Rescheduling interrupts
CAL: 0 function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
SPU: 0 Spurious interrupts
ERR: 0
MIS: 0
~

My lspci is:

00:00.0 Host bridge: VIA Technologies, Inc. CX700/VX700 Host Bridge (rev 03)
00:00.1 Host bridge: VIA Technologies, Inc. CX700/VX700 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. CX700/VX700 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. CX700/VX700 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. CX700/VX700 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. CX700/VX700 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
00:0f.0 IDE interface: VIA Technologies, Inc. VX800 Serial ATA and EIDE Controller
00:11.0 ISA bridge: VIA Technologies, Inc. CX700/VX700 PCI to ISA Bridge
00:11.7 Host bridge: VIA Technologies, Inc. CX700/VX700 Internal Module Bus
00:13.0 Host bridge: VIA Technologies, Inc. CX700/VX700 Host Bridge
00:13.1 PCI bridge: VIA Technologies, Inc. CX700/VX700 PCI to PCI Bridge
01:00.0 VGA compatible controller: VIA Technologies, Inc. CX700/VX700 [S3 UniChrome Pro] (rev 03)
02:03.0 Ethernet controller: Compex RL100-ATX 10/100
02:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
02:05.0 Ethernet controller: VIA Technologies, Inc. VT6120/VT6121/VT6122 Gigabit Ethernet Adapter (rev 11)
02:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
02:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
02:08.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller (rev 80)

My modules are:

Module Size Used by
dummy1 5376 0
ipt_MASQUERADE 5632 2
xt_CONNMARK 5760 1
tun 13696 0
bridge 57752 0
llc 9228 1 bridge
iptable_nat 9224 1
xt_state 4352 4
xt_tcpudp 4992 11
iptable_mangle 5248 1
iptable_filter 5376 1
ip_tables 16144 3 iptable_nat,iptable_mangle,iptable_filter
x_tables 19076 6 ipt_MASQUERADE,xt_CONNMARK,iptable_nat,xt_state,xt_tcpudp,ip_tables
nf_nat_pptp 5632 0
nf_nat_proto_gre 4740 1 nf_nat_pptp
nf_nat_ftp 5248 0
nf_nat 21656 5 ipt_MASQUERADE,iptable_nat,nf_nat_pptp,nf_nat_proto_gre,nf_nat_ftp
nf_conntrack_ipv4 19720 8 iptable_nat,nf_nat
nf_conntrack_tftp 7060 0
nf_conntrack_pptp 8964 1 nf_nat_pptp
nf_conntrack_proto_gre 8064 1 nf_conntrack_pptp
nf_conntrack_irc 8604 0
nf_conntrack_sip 11156 0
nf_conntrack_ftp 11300 1 nf_nat_ftp
nf_conntrack_h323 51912 0
nf_conntrack 67668 15 ipt_MASQUERADE,xt_CONNMARK,iptable_nat,xt_state,nf_nat_pptp,nf_nat_ftp,nf_nat,nf_conntrack_ipv4,nf_conntrack_tftp,nf_conntrack_pptp,nf_conntrack_proto_gre,nf_conntrack_irc,nf_conntrack_sip,nf_conntrack_ftp,nf_conntrack_h323
dummy 5376 0
vfat 14976 0
fat 54432 1 vfat
ata_generic 10244 0
pata_via 13572 0
libata 165192 2 ata_generic,pata_via
dock 12304 1 libata
winbond_840 25096 0
via_velocity 34056 0
crc_ccitt 3968 1 via_velocity
firewire_ohci 20992 0
firewire_core 46016 1 firewire_ohci
crc_itu_t 3968 1 firewire_core
loop 20100 1

ETH00 and ETH03 are recognized but not working. Maybe because of no CPU cycles. The module for the Compex card is winbond_840.

To get more free interrupts i disabled serial ports, usb and sound.
But the nics still bites 16, 18 and 19. I can not find a setting to diable firewire.