Reply To: ZS1.0b12 crashed

Home Page Forums Network Management ZeroShell ZS1.0b12 crashed Reply To: ZS1.0b12 crashed

#50601

AtroposX
Member

I had this in the post boot script:
# Startup Script
echo “3600” > /proc/sys/net/ipv4/netfilter/ip_conntrack_tcp_timeout_established
echo “1048576” > /proc/sys/net/ipv4/netfilter/ip_conntrack_max
echo 134217728 > /proc/sys/kernel/shmall
echo 134217728 > /proc/sys/kernel/shmmax
cd /Database/niagara2265_r10/;./n2265_load;./n2265_util -a;./n2265_util -0
ethtool -K ETH02 tso on;ethtool -K ETH03 tso on

had to make the 3600 for the tcp timeout, otherwise connections would build up, and tank the box. Raised the maximum conntrack max, adjusted the paging as someone else on here stated worked well for them, loads the driver, adds a heartbeat, and changes it to active/bypass mode, then turns on TSO for both of ther interfaces.