Reply To: [Question]Connect multiple ADSL in a single ETH01 using VLAN

Home Page Forums Network Management Networking [Question]Connect multiple ADSL in a single ETH01 using VLAN Reply To: [Question]Connect multiple ADSL in a single ETH01 using VLAN

#50579

Guilmon_DT
Member

@ppalias wrote:

There shouldn’t be a problem to do what you want. On ETH01 create 3 subinterfaces with a vlan assigned to them. Then click on Dyn.IP for that interface and switch to enable.
If it is not working properly, I suggest to try your setup without the Virtual Machine. Maybe something is wrong with its configuration and is not passing the vlan tags correctly to the Zeroshell.

Thank you very much, you’re right. I booted ZeroShell from Flash Drive and worked.
Yes, there is something wrong configured in the virtual machine.

Although it worked fine using the command line:
> dhclient ETH00.2
and not automatically in the Web Panel.

I would have to write that in the Script Post-Boot. ‘ll be back if I have questions.
Thanks Again =D