Reply To: ZeroShell as VPN Client to replace openVPN GUI on XP (Help)

Home Page Forums Network Management Networking ZeroShell as VPN Client to replace openVPN GUI on XP (Help) Reply To: ZeroShell as VPN Client to replace openVPN GUI on XP (Help)

#48530

Andy22
Member

Here is the route config after i started openVPN which also adds the TUN0 device.
As far as i can understand i need to foreward all client trafic from eth00 to the tun0? If so how do i setup this?

root@zeroshell 1> route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.88.0.1 10.88.0.125 255.255.255.255 UGH 0 0 0 tun0
dslb-088-077-19 * 255.255.255.255 UH 0 0 0 ppp0
208-85-2-66.uni dslb-088-077-19 255.255.255.255 UGH 0 0 0 ppp0
10.88.0.125 * 255.255.255.255 UH 0 0 0 tun0
192.168.0.0 * 255.255.255.0 U 0 0 0 ETH00
192.168.250.0 10.88.0.125 255.255.255.0 UG 0 0 0 tun0
default 10.88.0.125 128.0.0.0 UG 0 0 0 tun0
128.0.0.0 10.88.0.125 128.0.0.0 UG 0 0 0 tun0
default dslb-088-077-19 0.0.0.0 UG 0 0 0 ppp0

tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:10.88.0.126 P-t-P:10.88.0.125 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:2 errors:0 dropped:0 overruns:0 frame:0
TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:413 (413.0 b) TX bytes:606 (606.0 b)

PS: What im also not fully understand is that after the zeroshell has established a connection to the vpnserver, do the client DHCP network machines (XP machine) keep its DHCP ip/gateway or need this tobe updated somehow?
I expect they keep there normal ip/gateway and zeroshell routes the traffic internally?