Reply To: ZeroShell as VPN Client to replace openVPN GUI on XP (Help)

Home Page Forums Network Management Networking ZeroShell as VPN Client to replace openVPN GUI on XP (Help) Reply To: ZeroShell as VPN Client to replace openVPN GUI on XP (Help)

#48527

Andy22
Member

Here is the screen after running openVPN from the shell:

2009 Control Channel Authentication: using ‘/Database/1/ta.key’ as a OpenVPN static key file
2009 Outgoing Control Channel Authentication: Using 160 bit message hash ‘RIPEMD160’ for HMAC authentication
2009 Incoming Control Channel Authentication: Using 160 bit message hash ‘RIPEMD160’ for HMAC authentication
2009 LZO compression initialized
2009 Control Channel MTU parms [ L:1558 D:166 EF:66 EB:0 ET:0 EL:0 ]
2009 Data Channel MTU parms [ L:1558 D:1450 EF:58 EB:135 ET:0 EL:0 AF:3/1 ]
2009 Local Options hash (VER=V4): ‘228dbca3’
2009 Expected Remote Options hash (VER=V4): ‘7d871fb9’
2009 UDPv4 link local: [undef]
2009 UDPv4 link remote: 208.85.2.66:443
2009 VERIFY OK: depth=1, /C=DE/ST=General/L=General/O=Universal_ … ddress.com
2009 VERIFY OK: nsCertType=SERVER
2009 VERIFY OK: depth=0, /C=US/ST=General/L=General/O=Universal_ … ovider.com
2009 Data Channel Encrypt: Cipher ‘AES-256-CBC’ initialized with 256 bit key
2009 Data Channel Encrypt: Using 160 bit message hash ‘RIPEMD160’ for HMAC authentication
2009 Data Channel Decrypt: Cipher ‘AES-256-CBC’ initialized with 256 bit key
2009 Data Channel Decrypt: Using 160 bit message hash ‘RIPEMD160’ for HMAC authentication
2009 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 2048 bit RSA
2009 [ny] Peer Connection Initiated with 208.85.2.66:443
2009 TUN/TAP device tun1 opened
2009 /sbin/ifconfig tun1 10.88.0.126 pointopoint 10.88.0.125 mtu 1500
2009 Initialization Sequence Completed

Here are my network interfaces, i have setup ETH1 as WAN connected to the modem and ETH0 as lan:

********* VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
Status: 100Mb/s Full Duplex
ETH00 Link encap:Ethernet HWaddr 00:14:38:BB:BF:2F
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1522 errors:0 dropped:0 overruns:0 frame:0
TX packets:2102 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:215030 (209.9 Kb) TX bytes:1927782 (1.8 Mb)
Interrupt:15 Base address:0x4000
IP 192.168.0.1/24 brd 192.168.0.255
********* Unknown Model
Status: 100Mb/s Full Duplex
ETH01 Link encap:Ethernet HWaddr 00:80:C8:3B:3A:71
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1601 errors:0 dropped:0 overruns:0 frame:0
TX packets:1232 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1739593 (1.6 Mb) TX bytes:186793 (182.4 Kb)
********* Host-to-LAN OpenVPN Interface
Status: Connections from Road Warrior clients not accepted
VPN99 Link encap:Ethernet HWaddr 00:FF:C1:B3:72:A1
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
IP 192.168.250.254/24 brd 192.168.250.255
********* WAN
Status: Connected
ppp0 Link encap:Point-to-Point Protocol
inet addr:84.63.111.155 P-t-P:84.63.96.1 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:1573 errors:0 dropped:0 overruns:0 frame:0
TX packets:1205 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:1725545 (1.6 Mb) TX bytes:154501 (150.8 Kb)
IP 84.63.111.155 peer 84.63.96.1/32

Routing table:

Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
dslb-084-063-09 * 255.255.255.255 UH 0 0 0 ppp0
192.168.0.0 * 255.255.255.0 U 0 0 0 ETH00
192.168.250.0 * 255.255.255.0 U 0 0 0 VPN99
default dslb-084-063-09 0.0.0.0 UG 0 0 0 ppp0

Any advice whats missing?