Reply To: Dansguardian for Zeroshell 1.0.beta12

Home Page Forums Network Management ZeroShell Dansguardian for Zeroshell 1.0.beta12 Reply To: Dansguardian for Zeroshell 1.0.beta12

#48242

unsichtbare
Member

I have followed instructions precicely and install does not seem to be in place.
My Zeroshell version was (possibly still is) 1.0.beta11b ran the following:

root@access Database> wget http://www.zeroshell.net/listing/BA12-DansGuardian-Web-Content-Filter-2.8.0.6-1.0.beta12.tar.bz2
--08:55:14-- http://www.zeroshell.net/listing/BA12-DansGuardian-Web-Content-Filter-2.8.0.6-1.0.beta12.tar.bz2
=> `BA12-DansGuardian-Web-Content-Filter-2.8.0.6-1.0.beta12.tar.bz2'
Resolving www.zeroshell.net... 62.149.168.15
Connecting to www.zeroshell.net[62.149.168.15]:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 324,115 [application/x-bzip2]

100%[==================================================================================================================>] 324,115 145.15K/s

08:55:17 (144.77 KB/s) - `BA12-DansGuardian-Web-Content-Filter-2.8.0.6-1.0.beta12.tar.bz2' saved [324115/324115]

root@access Database> tar xvfj BA12-DansGuardian-Web-Content-Filter-2.8.0.6-1.0.beta12.tar.bz2
BA12/
BA12/configs/
BA12/configs/common
BA12/dependencies
BA12/install.sh
BA12/tars/
BA12/tars/BA12.tar.bz2
BA12/scripts/
BA12/scripts/20restarting
BA12/scripts/30print
BA12/scripts/10updater
root@access Database> cd BA12
root@access BA12> ./install.sh
Reading configuration ...
Checking dependencies ...
Extracting packages ...
Running scripts ...
Starting updater process for the release 1.0.beta11b ...
--> Checking for installed updates:
--> Replacing files ...
--> Patching files ...
--> Running scripts ...
Syncing filesystem... Done
Restarting proxy service...
DansGuardian 2.8.0.6 has been installed. Please, read the licensing notes
at the URL http://dansguardian.org/?page=copyright2

- The configuration files are located in /etc/dansguardian. For more details
look at the URL http://www.zeroshell.net/eng/dansguardian ;

- By default, the "Access Denied" messages are logged with the IP address of
the clients. Take care to avoid to violate the privacy of the users.
To change the log level, look at the configuration item "loglevel" in the
file /etc/dansguardian/dansguardian.conf;

- Keep in mind that DansGuardian works only if the transparent proxy service
is enabled and the "HTTP Capturing Rules" are configured;

- To tune the point of intervention of the filters, change the parameter
"naughtynesslimit" in the file /etc/dansguardian/dansguardianf1.conf.

And still, the GUI shows Release 1.0.beta11b .
Also I don’t have a /etc/dansguardian directory!

-J