Home Page › Forums › Network Management › Networking › zeroshell as a wireless client help › Reply To: zeroshell as a wireless client help
April 5, 2009 at 11:53 am
#47975
Member
I was able to connect in managed mode to the AP with my wifi.
and grab a ip address 192.168.1.100
If Zeroshell box connects to Linksys AP just specify IP address of AP as default gateway via menu [Setup]->[Router]. Also put Wireless interface of Zeroshell box into NAT list [Setup]->[Router]->[NAT].
If you can’t connect to AP from ZS, login to ZS via SSH and execute command
iwconfig
to see if your Wi-fi card is actually supported.
If it is supported and Wireless interface is named, for example, “wlan0”, then execute
iwlist wlan0 scan
to see if Linksys AP is in range.
Regards,
vmv4