Zeroshell Linux Router

Routing and Bridging Firewall Solutions

  • News
  • Hardware
  • Download
  • Forums
  • FAQ
    • General questions
    • Storage
    • Network
    • VPN
    • Wireless
  • Video
  • License
  • Contact
  • Login

Reply To: Regarding Wireless drivers in Zeroshell

Home Page › Forums › Network Management › ZeroShell › Regarding Wireless drivers in Zeroshell › Reply To: Regarding Wireless drivers in Zeroshell

February 25, 2009 at 8:21 pm #47687

imported_fulvio
Participant

Looking at the output of the lspci command it seems your wifi card is not installed or is broken. The issue is not due to the MadWiFi drivers.

Regards
Fulvio

News

  • New Kernel 4.14.83
  • LogMeIn Hamachi VPN Client available for Zeroshell
  • Zeroshell 3.9.0 for Raspberry Pi
  • New release Zeroshell 3.9.0
  • PPPoE Kernel Mode

Documentation

  • Multiple Internet Connections
  • QoS and Traffic Shaping
  • Hotspot using Captive Portal
  • RADIUS Accounting
  • Mobile Internet Connection
  • Wireless Access Point
  • OpenVPN Gateway
  • OpenVPN Client Configuration
  • Transparent Web Proxy
  • Captive Portal SAML 2.0
  • OpenDNS setup
  • Deep Packet Inspection
  • Traffic Statistics
  • Kerberos 5 Tutorial
    • Introduction
    • Aims
    • Definitions and terms
    • Operation
    • Tickets
    • Kerberos Cross Authentication
  • X.509 CA
  • RADIUS
  • VPN
  • Firewall
  • LDAP

Recent Topics

  • PC ISO install instructions
  • How can I create a DHCP server in ZeroShell 3.9.0 for multiple subnets?
  • LAN2LAN to VPN Provider – Up, pingable through from Zs, but not routing from LAN
  • Qrcode per zerotruth ( qrcode for zerotruth )
  • Activation and access to repositories
  • Netbalancer in zS 3.8.1 strange behaviour
  • Feature request
  • Zeroshel and Parallel Port ( modules wanted )
  • Get DNS records list
  • configure user to connect 2 hours per day
  • Accounting
  • Unable to Get WAN DHCP Address
  • In Praise of ZeroShell
  • ZeroShell as an LXC in Proxmox?
  • Flush DNS forwarder cache
  • PPPoE Not Working on Raspberry Pi 3.9.1A But Does Work on X86 3.9.0
  • RPI 3 B+: console=ttyS0 not working while booting / need a development guide.
  • DNS A record for domain
  • Using conntrack -F to keep VOIP working seems to be interfering with VPN
  • These new forum UI
  • WiFi client mode WPA-EAP (PEAP) MSCHAP
  • LDAP Corruption After Profile Restore
  • SITE TO SITE VPN TUNNEL With Public IPs and bridging
  • Using ZeroShell as a VM-Lab networking device with WiFi uplink
  • One touch x220s 3g dongle
  • Wireless AP (DLINK DWA-582 802.11ac)
  • BGP
  • NEW Release ZS 3.91 for X86-64 and Raspberry
  • Authentication with website link
  • Python Programming

Recent Replies

  • How can I restrict access to only 1 host on my LAN for VPN?
  • Net Balanacer failover monitoring
  • Qrcode per zerotruth ( qrcode for zerotruth )
  • Change HTTPS port
  • Zeroshel and Parallel Port ( modules wanted )
  • Change HTTPS port
  • Many updates failing
  • configure user to connect 2 hours per day
  • Unable to Get WAN DHCP Address
  • 3.9.0A frequent kernel panic when booting on RPI 3 B+
  • Documentation
  • Default gateway? Can no longer set by interface?
  • Running Zeroshell in a VM
  • Running Zeroshell in a VM
  • ZeroShell-3.9.0-X86.iso seems corrupt
  • 3.9.0A frequent kernel panic when booting on RPI 3 B+
  • These new forum UI
  • These new forum UI
  • These new forum UI
  • WiFi client mode WPA-EAP (PEAP) MSCHAP
Continue with FacebookContinue with GoogleContinue with Twitter
Copyright (C) 2005-2018 by Fulvio Ricciardi - Lecce (Italy) | Theme: News Portal by Mystery Themes.
  • Twitter
  • Facebook
  • LinkedIn