Reply To: Kernel compiled for PentiumPro = problem with cmov

Home Page Forums Network Management ZeroShell Kernel compiled for PentiumPro = problem with cmov Reply To: Kernel compiled for PentiumPro = problem with cmov

#47542

tecnoxarxa
Member

@fulvio wrote:

What processor has this problem?

Vortex 86soc

But, if you compile for pentium, 586, pmmx I dont have problems.

My other problem is when I boot with your precompiled kernel changin only target processor option. I have this message:

Probing [hda] IDE device to startup the system …
Loading root filesystem into RAM device… Success
loop: module loaded
VFS: Cannot open root device “” or unknown-block(8,2)
Please append a correct “root=” boot option; here are the available partitions:
0100 131072 ram0 (driver?)
0101 131072 ram1 (driver?)
0102 131072 ram2 (driver?)
0103 131072 ram3 (driver?)
0104 131072 ram4 (driver?)
0105 131072 ram5 (driver?)
0106 131072 ram6 (driver?)
0107 131072 ram7 (driver?)
0108 131072 ram8 (driver?)
0109 131072 ram9 (driver?)
010a 131072 ram10 (driver?)
010b 131072 ram11 (driver?)
010c 131072 ram12 (driver?)
010d 131072 ram13 (driver?)
010e 131072 ram14 (driver?)
010f 131072 ram15 (driver?)
0300 1957536 hda driver: ide-disk
0301 13633 hda1
0302 157136 hda2
0303 818864 hda3
0700 131072 loop0 (driver?)
Kernel panic – not syncing: VFS: Unable to mount root fs on unknown-block(8,2)

How it is ?