Reply To: port forwarding

Forums Network Management ZeroShell port forwarding Reply To: port forwarding


My router is in brige mode with Zeroshell set up with PPPoE, so the modem itself is not using the firewall etc.

I know how to set up an “allow” firewall entry but i didnt not see how to forward it to a specific IP.

ETH01 is connected to my modem which is in bridge mode, so i set up PPPoE on ETH01. ETH01 has the ip and the modem is ETH00 is on the lan side and is using the 10.x.x.x ip ranges. NAT is set up on ppp0.