Reply To: GPRS/EDGE/UMTS/HSDPA router with Zeroshell

Home Page Forums Network Management ZeroShell GPRS/EDGE/UMTS/HSDPA router with Zeroshell Reply To: GPRS/EDGE/UMTS/HSDPA router with Zeroshell

#46584

jstrebel
Member

@fulvio wrote:

You can find further details about the connection dialog in the [Logs][chat] section.

Regards
Fulvio

Fulvio,
thanks for your reply. Could you give me a hint what is going wrong when the ZS is trying to open a session.
I have tried with two different dial strings, the result seems to be the same.
Regards jakob

with dial string *99#
18:50:25 abort on (BUSY)
18:50:25 abort on (NO CARRIER)
18:50:25 abort on (ERROR)
18:50:25 report (CONNECT)
18:50:25 timeout set to 15 seconds
18:50:25 send (AT^M)
18:50:25 expect (OK)
18:50:25 AT^M^M
18:50:25 OK
18:50:25 — got it
18:50:25 send (AT+CGDCONT=1,”IP”,”internet.sunrise.ch”,””,0,0^M)
18:50:25 expect (OK)
18:50:25 ^M
18:50:25 AT+CGDCONT=1,”IP”,”internet.sunrise.ch”,””,0,0^M^M
18:50:25 +CME ERROR
18:50:25 — failed
18:50:25 Failed (ERROR)

with dial string: *99***1#

18:58:45 Failed (ERROR)
18:58:54 abort on (BUSY)
18:58:54 abort on (NO CARRIER)
18:58:54 abort on (ERROR)
18:58:54 report (CONNECT)
18:58:54 timeout set to 15 seconds
18:58:54 send (AT^M)
18:58:55 expect (OK)
18:58:55 AT^M^M
18:58:55 OK
18:58:55 — got it
18:58:55 send (AT+CGDCONT=1,”IP”,”internet.sunrise.ch”,””,0,0^M)
18:58:55 expect (OK)
18:58:55 ^M
18:58:55 AT+CGDCONT=1,”IP”,”internet.sunrise.ch”,””,0,0^M^M
18:58:55 +CME ERROR
18:58:55 — failed
18:58:55 Failed (ERROR)