Home Page › Forums › Network Management › ZeroShell › Possible to specify inbound and outbound bandwith in qos? › Reply To: Possible to specify inbound and outbound bandwith in qos?
You have ZS installed with 2 network cards, one connected to your cable modem, the other to your internal network. You also have the two cards either bridged or you are routing NAT’ed addresses from the local side.
My undestanding of QoS is that you can only QoS the outgoing traffic of a card. Therefore to do Qos on the upload you need to change the settings on the card connected to the router. Do do Qos on the download speed you change the settings of the card attached to the local side of your network.
This of course gives you the added advantage that the cable modem is no longer the bottle neck.
If my assumptions are incorrect let me know.