Reply To: proxy arp and cluster question

Home Page Forums Network Management ZeroShell proxy arp and cluster question Reply To: proxy arp and cluster question

#45939

imported_fulvio
Participant

Proxy arp is not supported using the web interface, but you can easilly enable it with the command

echo 1 > cat /proc/sys/net/ipv4/conf/ETH01/proxy_arp

which enable the proxy arp on the ETH01 interface.
Sometimes you used this feature and it worked fine.

At the moment it is not possible to configure the fault tolerance for the virtual servers.

Regards
Fulvio